Uncle DT's Random Image Thread - Printable Version +- Tymeg (https://forums.tymeg.net) +-- Forum: The Main Forum (https://forums.tymeg.net/forumdisplay.php?fid=3) +--- Forum: Random Image (https://forums.tymeg.net/forumdisplay.php?fid=4) +--- Thread: Uncle DT's Random Image Thread (/showthread.php?tid=4) Pages: Archived Pages:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
|
RE: Uncle DT's Random Image Thread - Kruger - 06-07-2023 I think you had the same model that I had, and the sliders had LEDs in them as well plus the push buttons, so I think the total came to around 114. And then you added that breadboard signal display that was another 20 or so on top of what the stereo, 8-bit and all of the components, and whatever else I am forgetting had. RE: Uncle DT's Random Image Thread - Blaze - 06-07-2023 I remember you having the same one as well. And I thought there were LEDs on the sliders, but every image I searched for that had them also had buttons on the bottom and a slider with a green LED on either side of the display and I don't remember those.. RE: Uncle DT's Random Image Thread - Kruger - 06-08-2023 That's 'cause you were looking in the wrong places. I still have mine and while I haven't used it in a while, that old stereo is up at the mountain house. A few years ago it stopped sending signal to the speakers and while I just keep it around for nostalgic reasons, that's probably not very bright of me... RE: Uncle DT's Random Image Thread - Blaze - 06-08-2023 Ah-ha! I knew you were bright. It was an AudioSource and I remember you having a model newer/higher level than mine. This is what I had... RE: Uncle DT's Random Image Thread - Kruger - 06-12-2023 The stereo that I have now has a set up mode that lets you adjust the output level for each channel assuming you have a decibel meter. It's awesome that sitting in my preferred spot all of the channels are balanced. And it's expected to not use an equalizer since the encoding in the movie is already equalized (though I'm sure you can if you wanted to adjust for your room specific acoustics)... RE: Uncle DT's Random Image Thread - Blaze - 06-12-2023 My audio receiver has a feature something like that where you would use a stereo microphone and put it where you would sit and it'd adjust the settings accordingly. Too bad I don't have a actual media room to take advantage of that... RE: Uncle DT's Random Image Thread - Kruger - 06-14-2023 No media room? Aren't the kids going to be out of the nest soon? You'll have a couple of extra rooms that you need to do something with... RE: Uncle DT's Random Image Thread - Blaze - 06-14-2023 Soon? Have you seen the economy? $7.25 federal minimum wage since 2009. Average rent $2,100/month. Do the math. You'd be $800 in the hole every month provided you didn't need to eat, have electricity, heat or water, transportation, clothes, healthcare... RE: Uncle DT's Random Image Thread - Kruger - 06-15-2023 Ouch, yeah, you are right. I have no clue how kids these days are making it, it's certainly a whole new level of difficulty that we didn't have. RE: Uncle DT's Random Image Thread - Blaze - 06-15-2023 It kinda sucks seeing how their grandparents were able to buy a house, vacation when they wanted to, thrive and retire with a lucrative pension. All that with a high-school diploma and a single income. The new American dream is to live in another country... RE: Uncle DT's Random Image Thread - Kruger - 06-16-2023 Now it doesn't make a lot of sense to stick with a company like our parents did (for the most part). I have to say I've been pretty lucky, the previous two companies that I worked for were small "family" run, and even the one that I'm at now has the right mentality that I'm not just a number... RE: Uncle DT's Random Image Thread - Blaze - 06-17-2023 I've been pretty lucky as well. Most of my roles I've pretty much stumbled into. But working at a giant company, I'm hoping that I'm not even a blip on their radar. Just 7 years, 4 months and 8 days left. I just hope our stupid government doesn't continue to try and fuck over the 99% to prevent anyone from actually being able to retire... RE: Uncle DT's Random Image Thread - Kruger - 06-21-2023 That's how I prefer to run as well, under the radar. One time while at Elixir I was at the office and there was some gathering in the back yard (when the office was in an old Victorian house on Main St) and someone came up to me and said I needed to go over and chat with Basit (the owner). It turns out he had zero clue who I was and why I was there, even though we talked frequently and he had met me on many occasions in the past. But then again that dude use to smoke all of the time and I don't doubt he was baked while at the office more often than not... RE: Uncle DT's Random Image Thread - Blaze - 06-21-2023 That was like at Standard - I was doing pretty good when I came back staying under the radar for a while after re-assimilating from my few months down in Charlotte. And then that smug asshat Goldstein who more than once pointed out how he has a Phd and runs his own business could only suggest throwing more money and hardware at our printers for being able to print that digital paper at rated speed. $50,000+ for a bunch of blade servers and it still wouldn't run at rated speed. But me the simpleton developer in his jeans, t-shirt and sneakers couldn't possibly understand how any of this works came up with a POC solution during lunch and had the printer running full speed - all in software. Next thing I know I'm being told not to share this information with anyone and at the end of it all I've got a patent for my solution. Way to stay under the radar, eh... RE: Uncle DT's Random Image Thread - Kruger - 06-22-2023 You might want to check and make sure that switch yards are not no-fly zones. The government has really been changing some of those laws and requirements related to drone flights... |